V-Gard® Arc Visors

These PC visors are engineered to help protect against impact and dangerous arc flash hazards. They are perfect for electrical workers and electricians working with high-voltage connections.

 
Note: V-Gard Arc Visors are intended to be used only with dielectric frames and helmets.

Part Number
Description
10115847
10115847

VISOR, V-GARD, ARC, CLEAR PC, MOLDED 9.5"x19"x0.98"

10118480
10118480

VISOR, V-GARD, PC, ARC

 p/n 10115847:

  • 9.25” (23.5 cm) x 18” (45.7 cm) x .065” (1.7 mm).
  • Impact-rated protection.
  • Extended length and width for greater coverage of face and neck.
 
p/n 10118480:
  • 8” (20.3 cm) x 17.25” (43.8 cm) x .065” (1.7 mm) + 3.02” (7.7 cm )(chin protector length).
  • Impact-rated protection.
  • Includes V-Gard Standard Chin Protector (required to achieve arc rating); must be assembled
  • onto visor by user.
Markets: Construction, General Industry, Mining, Oil & Gas, Utilities

Approvals subject to change without notice and may differ based on configuration, part number and/or country.
Contact Customer Service or check approval label on product for specific approval information.

 p/n 10115847:

  • Meets requirements for ANSI/ISEA Z87.1-2010.
  • Rated to 12.9 cal/cm2 when tested to ASTM F2178-2008 (ref. NFPA 70E-2015, PPE Category 2), and when worn with a V-Gard Hard Hat (PN 475358) and V-Gard Frame (PN 10121266).
 
p/n 10118480:
  • Meets requirements for ANSI/ISEA Z87.1-2010.
  • Rated to 11.3 cal/cm2 when tested to ASTM F2178-2008 (ref. NFPA 70E-2015, PPE Category 2), and when worn with a V-Gard Hard Hat (PN 475358), V-Gard Frame (PN 10121266), and V-Gard Standard Chin Protector (PN/10115827).
 
Call MSA Customer Service (800-MSA-2222) for protection levels when using these V-Gard Arc
Visors with other V-Gard Frames and MSA Helmet combinations.